{"product_id":"is111-2150h","title":"2150cc Honda\/Acura NSX (90-05) Fuel Injector Clinic Injector Set (High-Z) (is111-2150h)","description":"Honda\/Acura NSX (90-05) Fuel Injector Clinic Injector Set: 6x2150cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT DEN6 or add Plug \u0026amp; Play adaptors PADPDtoJ6 (1990-2005 All 3.0L) or PADPDtoH6(1997-2005 ALL 3.2L) \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\" target=\"_blank\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e  dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the  \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" onclick=\"window.open(this.href, 'SampleDataMatchSheet', 'resizable=yes,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no,width=500,height=700'); return false;\"\u003e\u003cspan style=\"background-color:#ccff99;\"\u003eData Match Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e  \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"PGTDEN6","offer_id":51709740777771,"sku":"FIC is111-2150h_\u0026_PGTDEN6","price":1327.9,"currency_code":"USD","in_stock":true},{"title":"PADPDtoJ6 (1990-2005 All 3.0L)","offer_id":51709740810539,"sku":"FIC is111-2150h_\u0026_PADPDtoJ6","price":1278.0,"currency_code":"USD","in_stock":true},{"title":"PADPDtoH6(1997-2005 ALL 3.2L)","offer_id":51709740843307,"sku":"FIC is111-2150h_\u0026_PADPDtoH6","price":1278.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/9124\/9973\/files\/2150-53-11-21x6_739a632a-acde-4d32-ad28-d9c013860e14.jpg?v=1767816681","url":"https:\/\/ebtecautomotive.com\/products\/is111-2150h","provider":"EBTEC AUTO","version":"1.0","type":"link"}